Replacement sponge for use with the WOCA applicator for quick oiling and renovation of terraces. Easy and convenient to work with.
How to apply oil using the WOCA applicator?
Before starting oiling, clean new and old wooden surfaces with Woca cleaner.
Leave the wood to dry for at least 24 hours so that the moisture content does not exceed 17%.
Sand the rough wood fibers with sandpaper with a grain of 120.
Oil the wood only in dry weather, min. + 13 temp. Avoid direct sunlight and high temperatures.
Stir the oil well before use.
Apply an even thin layer of oil to the wooden surface with the Woca applicator.
Wipe off excess oil with a clean cotton cloth no later than 5 minutes. Be especially careful to remove excess oil from joints and grooves.
Tip
If the surface does not seem to be sufficiently saturated with oil, repeat the procedure several times.
Depending on weather conditions and outside temperature, the oil will fully harden within 24-48 hours. During this period, the wood should not be exposed to water.
